AUDIstream2air setup instructions

Setup instruction for the 2GEN adapter:

1. Plug the adapter into AMI port
2. Plug the spare USB cable into USB charger for power (the 2gen systems do not deliver enough power for Bluetooth music streaming)
3. Is the blue/red light is on on the adapter?
4. The blue light should be blinking (if not, change the mode by pushing the button on top of the adapter), then look for "BT speaker" or "Klevery" (depending on the model) on your Bluetooth devices list and pair both devices. No pairing code required.
5. Select the Aux option on the Audi audio system.
6. Play the music.

Setup instruction for the 3GEN adapter:

1. Plug the adapter into AMI port
2. Is the blue/red light is on on the adapter?
3. The blue light should be blinking (if not, change the mode by pushing the button on top of the adapter), then look for "BT speaker" or "Klevery" (depending on the model) on your Bluetooth devices list and pair both devices. No pairing code required.
4. Select the Aux option on the Audi audio system.
5. Play the music.